Responsibilities：

Assist in the introduction of international innovative technologies into the domestic market, and assist in the implementation and application of international technologies in combination with China's national conditions. include:

1. Prepare pilot and demonstration projects for new technologies.

2. Operate and guide pilot test.

3. Collect and analyze operation data.

4. Conduct basic analysis and coordinate laboratory testing.

5. Prepare internal reports.

6. Help to prepare patent application and intellectual property management.

7. Assist or prepare process introduction for customers.

8. Coordinate ongoing optimization projects with local staff on site.

9. Research new technologies related to the introduction of Chinese market.

10. Project coordination among international technical partners.

11. Provide support to other departments for the introduction of new technologies.

12. Other tasks assigned by chief engineer.

Qualification：

1. Bachelor or master degree in engineering, process engineering, mining engineering or similar.

2.3 years of working experience, working experience in Europe, America or similar countries in environmental engineering is preferred.

3. Fluent in English.

4. Strong hands-on ability, positive thinking, active problem-solving consciousness.

5. Experience in water industry is preferred.

Responsibilities：

1. undertake due diligence on water treatment facilities of the early stage project. Assist business personnel to promote the company process package and equipment.

2. undertake the project process technical scheme, including but not limited to process calculation, PFD, plan, p&id and other drawings or documents.

3. undertake technical support work in construction drawing design, project construction period and commissioning and commissioning.

4. undertake technical support work of operation projects.

5. undertake the small and medium-sized tests of technical research and development projects, and complete the sorting and analysis of experimental data.

6. complete other work assigned by superior leaders.

Qualification：

1. Bachelor or master degree in environmental engineering, chemical engineering or related.

2. 3-5 years of industrial water experience in design institute or environmental protection company.

3. Familiar with wastewater treatment, membrane process and zero discharge process. Understand the selection of related equipment and process unit.

4. Having participated in the design of medium or large industrial water treatment projects is preferred.

5. Be able to travel frequently.

Responsibilities：

1. Responsible for the due diligence of water treatment facilities in the early stage of the project. Assist commercial personnel to promote the company's process package and equipment.

2. Undertake the project process technical scheme, including but not limited to process calculation, PFD, plan, P & ID and other drawings or documents.

3. Undertake the technical support work in the process of construction drawing design, project construction and commissioning.

4. Undertake the technical support of operation projects.

5. Undertake the pilot and pilot projects of technology research and development, complete the collation and analysis of experimental data.

6. Complete other tasks assigned by superior leaders.

Qualification：

1. Bachelor or master degree in environmental engineering, chemical engineering or related.

2.3-5 years of industrial water experience in design institute or environmental protection company.

3. Familiar with wastewater treatment, membrane process and zero discharge process. Understand the selection of related equipment and process unit.

4. Having participated in the design of medium or large industrial water treatment projects is preferred.

Responsibilities：

1. be responsible for the construction of the company team and recruitment of talents, understand the talent portrait from all departments of the team and assist the heads of each department in the recruitment.

2. cooperate with the general manager or each part of the supervisor to plan the team structure and optimize the existing architecture.

3. assist the general manager to allocate the company's human resources effectively, coordinate the needs of each department and maximize the efficiency of the company's human resources.

4. cooperate with the general manager to formulate the target assessment plan of all staff of the company, and evaluate the performance of the supervisors and employees of each department in a quarterly manner.

5. formulate the implementation of all management formulation and supervision system of the company.

6. assist the general manager in the internal project management of the company, such as product development progress, project declaration progress, bidding or financial plan implementation, etc.

7. complete other work arranged by the general manager.

Qualification：

1. No limitation on major, bachelor degree or above, instrumentation, manufacturing, medical and health industries are preferred.

At least 

2.5 years HR or related management experience.

3. Good logical thinking, strong language expression ability, strong communication ability and high pressure resistance ability.

4. Have a deep understanding of start-up enterprises, have great enthusiasm for scientific and technological innovation, and are willing to grow with enterprises.

Responsibilities：

1. Independently complete the design and modeling of flow channel, liquid control system, quantitative system, temperature control system or optical system in the microfluidic architecture according to the requirements of the product center.

2. According to the requirements of R & D department, complete the design of R & D prototype and prototype structure, and upgrade and iterate the structural parts of existing prototype.

3. According to the design, make the processing plan of structural parts, such as finishing, 3D printing or injection molding, and complete the installation and testing independently.

4. Assist the product center to complete the pretreatment, bonding, high and low temperature, anti-corrosion, leak detection and strength test of structural parts.

5. Provide efficient solutions and iterative solutions according to test results.

6. Improve the BOM, sip or SOP of the finalized or short-term products without adjustment.

Qualification：

1. Have strong imagination and creativity, can break through the inherent thinking of the industry to independently complete quite challenging structural design.

2. No limitation on major, more than 3 years working experience, medical in vitro diagnostic equipment, aerospace aircraft design, industrial instrumentation, high-end equipment and other fields are preferred.

3. Graduated institutions: Bachelor degree or above, 211 or 985 is preferred.

4. Participated in the whole process from design to mass production, familiar with mold, injection molding, machining & sheet metal processing, product design, product BOM table making, product assembly guidance / SIP & SOP editing.

5. Software skills: Creo (proe) / UG / SW and other parametric modeling software, CAD, office.

6. Strong communication, creativity and expression skills.

7. No more than 30 years old.

8. Bachelor degree or above, 211, 985 or overseas well-known institutions are preferred.

Responsibilities：

Key points: production execution, system establishment, safety management, emergency treatment, evaluation and assessment.

1. Responsible for the formulation and effective implementation of the annual and monthly plans of relevant equipment maintenance.

2. Responsible for the establishment, improvement and update of relevant management system and account.

3. Be responsible for training and supervising the operators to comply with the safety operation requirements of the equipment to ensure no production accident.

4. Responsible for the cleaning of facilities and equipment in the responsible area.

5. Be responsible for the emergency or fault maintenance of the equipment in the factory according to the requirements.

6. Responsible for reasonable suggestions or opinions in daily work, and feedback to the superior, so as to improve the management.

7. Responsible for the communication, report and coordination of emergency equipment in case of accident, so as to minimize the impact on production.

8. Be responsible for the evaluation and assessment of operators.

9. Complete other tasks assigned by superior leaders.

Qualification：

1. Full time college degree or above. Mechanical and electrical integration, electrical automation and other related majors.

2. Be familiar with the structure and principle of various equipment in sewage treatment plant. Master the structure principle of relevant instruments in sewage treatment plant, have the ability of troubleshooting and solving. Engaged in similar work for more than one year.

3. Familiar with word, Excel, PPT and other office software.

4. Master the application of TPM, smart, PDCA and other management tools and methods.

5. Have certain writing skills, data collection and analysis ability.

Responsibilities：

Finish other temporary work assigned by superior.

Assist the general manager of the project company in daily production technology operation of the project company.

1. Track and analyze the water quality and sludge discharge of the wastewater treatment plant, prepare the production scheduling notice according to the operation parameters of the production process, submit it to the operation team for review and approval, and then hand it over to the operation team for implementation, guide and supervise the operation team to adjust the operation process parameters.

2. According to the needs of production, various comparative experiments are carried out to determine the best process operation scheme to guide production.

3. Carry out secondary process inspection.

4. For the sudden change of inlet and outlet water quality, determine the countermeasures.

5. Coordinate the daily water quality analysis of the laboratory according to the process requirements.

6. Responsible for the collection and management of various test data, and prepare monthly water quality report.

7. Be responsible for measurement management, summarize monthly production and operation analysis report.

8. Be responsible for the inventory, use and purchase management of pharmaceutical products.

9. Be responsible for the process and technology training of employees.

10. Be responsible for the external technical exchange of the sewage treatment plant, widely learn the advanced operation and management experience at home and abroad, and ensure to improve the operation efficiency and do a good job in energy saving and consumption reduction under the premise of safety, stability and reliability.

11. Finish other temporary work assigned by superior.

Qualification：

1.3 years working experience in environmental protection industry. Bachelor degree or above, major in environmental engineering, water supply and drainage engineering, chemical engineering, etc., intermediate title or above is preferred.

2. Proficient in sewage treatment professional knowledge, familiar with sewage treatment process and process control methods.

3. Be familiar with office automation software and AutoCAD software.

4. Be able to correctly analyze and judge the problems in various technical fields of the company, and solve them timely and effectively.

5. Be able to put forward reasonable opinions and constructive suggestions on various issues involved in the work process according to the work needs.

6. Have strong ability of language expression and text organization, and be able to write technical documents and other text materials.

Responsibilities：

1. Bachelor degree or above, major in engineering, civil engineering or other related fields, more than 5 years of project management experience, aged 28-40.

2. Have the municipal professional first class constructor certificate.

3. Be familiar with technical management, cost management, contract management, schedule management and other knowledge, as well as the dynamic management process of the whole staff and the whole process.

4. Have good professional quality, strong sense of responsibility, strong plasticity and good understanding.

5. Adapt to work abroad and obey the management of the company.

6. Have certain professional technology and management knowledge, rich practical experience and strong ability of organization, command, decision-making and response.

 Qualification：

1. Bachelor degree or above, major in engineering cost, engineering management, architecture, etc., more than 3 years of bidding experience, aged 25-35.

2. Second level or above cost engineer certificate is preferred.

3. Understand the bidding law, be familiar with the bidding process of the project, and have good professional quality.

4. Be familiar with the summary, typesetting and retrieval of project bidding documents by using office software.

5. Careful, patient, strong coordination and communication skills, team spirit, strong sense of responsibility.

6. Understand the process of electronic bidding, handle CA locks in various provinces and cities, and make and upload electronic bidding documents.

Responsibilities：

1. Make statistics and summary of the plans submitted by each company every month, and sort out the monthly bidding plan.

2. Arrange the bidding time according to the plan and prepare the bidding documents.

3. Carefully study the bidding documents and make corresponding response conditions and scoring standards one by one.

4. Sort out the system data of the completed bidding work, file, file the winning project, and establish the account.

5. Assist the project company to draft the contract terms.

6. Collect and sort out the information of general contractor, subcontractor, supplier and material price, and analyze and evaluate the supplier regularly.

7. Set up information file accounts of all kinds and grades to facilitate inquiry and provide basis for decision-making. Participate in the preparation of the target cost of each project, and include it in the monthly, quarterly and annual performance appraisal system of the project company.

8. Regularly collect bidding information in each bidding information network, select and summarize projects suitable for the company, and report to leaders.

Qualification：

1. Bachelor degree or above, major in engineering cost, engineering management, architecture, etc., more than 3 years of bidding experience, aged 25-35.

2. Second level or above cost engineer certificate is preferred.

3. Understand the bidding law, be familiar with the bidding process of the project, and have good professional quality.

4. Be familiar with the summary, typesetting and retrieval of project bidding documents by using office software.

5. Careful, patient, strong coordination and communication skills, team spirit, strong sense of responsibility.

6. Understand the process of electronic bidding, handle CA locks in various provinces and cities, and make and upload electronic bidding documents.

Responsibilities：

1. Under the leadership of the project manager, be responsible for the site civil construction management.

2. Participate in the joint review of drawings and check the technical quality, safe and civilized construction, progress assurance measures and assurance system of the construction unit.

3. Check the implementation of construction organization design by subcontractors.

4. Be familiar with the drawings, and control the civil construction quality according to the project quality supervision plan and relevant specifications and standards.

5. Participate in the inspection and acceptance of divisional, sub divisional and concealed works.

6. Responsible for the implementation of design changes and engineering visa.

7. Participate in the project coordination meeting and the regular supervision meeting, put forward the treatment opinions for the problems in the process of civil construction, and supervise the implementation.

8. Check the non-conforming items in the civil engineering and put forward the treatment opinions. At the same time, accurately report the real situation to the project management department, and implement the treatment decisions made by the project management department.

9. Responsible for the acceptance of civil engineering.

10. Complete other tasks assigned by leaders.

Qualification：

1. Bachelor degree or above, major in civil engineering, installation, electromechanical, environmental engineering, etc.

2. More than 1-2 years of civil engineering construction experience, excellent fresh graduates are also acceptable.

3. Have good professional quality, strong sense of responsibility, good learning ability, strong plasticity and good savvy.

4. Adapt to work abroad and obey the management of the company.

Responsibilities：

1. Strictly abide by the company's management system.

2. Be responsible for the reasonable deployment of the staff in each post of the Department and the occupational, safety and health training of the staff in the Department.

3. Responsible for the establishment and improvement of the company's equipment management system and its operation.

4. Be responsible for formulating and revising the maintenance and repair procedures of each equipment in the Department.

5. Make equipment maintenance plan.

6. Responsible for the record management of the maintenance and repair of the equipment in the Department.

7. Responsible for the purchase and acceptance of equipment.

8. Responsible for the preparation of spare parts and oil procurement plan for equipment maintenance and repair.

9. Be responsible for organizing external liaison and coordination of the Department.

10. Responsible for external entrusted maintenance.

11. Complete other tasks assigned by leaders.

Qualification：

Under 45 years old, more than 3 years of equipment maintenance experience. Major in mechanical equipment and manufacturing.

Responsibilities：

Responsible for the operation of sewage treatment plant and pumping station, account formulation, management and optimization, process adjustment and optimization, dealing with temporary problems, coordinating the relevant work of departments and the work assigned by the superior.

1. Master the daily production process operation of the sewage treatment plant.

2. Be responsible for mastering the water quality of inlet and outlet in time to ensure that the effluent quality meets the discharge standard.

3. Responsible for monitoring the operation status of process equipment, relevant technical parameters, and timely adjusting process parameters.

4. Collect, sort and file the technical data related to production and operation.

5. Analyze the existing process, and put forward the optimization scheme or technological transformation scheme.

6. Participate in the inspection work of competent departments and supervision departments.

7. Complete other tasks assigned by leaders.

Qualification：

1. Major in environmental engineering, environmental science, water supply and drainage engineering and chemical engineering.

2. Municipal or industrial wastewater treatment plant operation supervisor or above is preferred or engaged in process commissioning.

3. Participated in the preliminary construction and installation of the sewage treatment plant project.

4. Have participated in technological transformation and other related skills.

5. Understand the basic knowledge of sewage plant equipment, electrical, automatic control and other related majors.

6. Working experience at least 3 years.